The EY7880 is a heavy duty cordless rotary hammer drill from Pansonic using the latest high capacity Lithium-Ion battery technology. Powerful cordless tool complete with a comprehensive selection of accessories.
- 3 Mode Drilling:
Rotary Only for wood and steel drilling
Rotary Hammer for masonry and concrete drilling
Hammer Only* for chiselling concrete etc
- LED job light
- Battery low indicator
- Overheating warning indicator
- Use straight shank rotary or hammer bits with adapter chucks**
* hammer only function requires rotary stop adapter EY9HX402 (included)
** Drill Chuck EY9HX400E / Hammer Chuck EY9HX401E (both not included)
- 28.8 Volt motor
- 0-500rpm / 0-920rpm no load speed (Slow / High)
- 0-2800bpm / 0-4500bpm impact rate (Soft / Hard)
- max drilling capacities - 20mm masonry / 13mm steel / 27mm wood
- 3.8kg net weight including battery
- 70min full charge time / 55min quick charge
- 4.3m/s² typical vibration levels to EN 60745
Benefits of Lithium-Ion Battery technology
- Higher power outputs than conventional NiCD & NiMH batteries
- No memory effect keeps batteries at full capacity
- 40% Longer run times
- No self discharge when batteries go unused for long periods
- No battery fade - full power right to the end of the charge
- Faster full & top-up charging
- Less weight reduces user fatigue
- 2x 28.8V 3.0Ah Lithium-Ion battery packs (EY9L80)
- Fast battery charger (EY0L80)
- Rotary stop SDS+ adapter (EY9HX402)
- Side handle & depth stop
- Shoulder strap
- SDS chuck grease
- Heavy duty carry case
- 12 month manufacturer's warranty
