Draper 110L/Min (Max) 350w 230v Submersible Water Pump
DIY/domestic use in and around the home and garden. Ideal for irrigating gardens, draining cellars/basements and powering waterfalls/fountains. Supplied complete with 19mm diameter hose adaptor, BS approved non-rewireable moulded plug and 10M (approx.) cable.
Specification:
Maximum head height ... 7M
Maximum output ... 110L/min
Hose height - Approx. Output ... 3M - 65L/min
4M - 50L/min
6M - 30L/min
Maximum water temperature ... 35°C
Maximum particle size ... 5mm dia.
Output aperture ... 25mm dia.
Additional information regarding Submersible Pumps
Pumps with automatic float switches allow the pump to be left unattended and automatically cuts out when the water level drops below the pumps minimum. Pumps with no float switch are manual and must not be left running when the water level drops below the required minimum.
It is recommended that an RCD is always used with a submersible pump as should be the case whenever electrical products are used with water.
The maximum flow rate of a pump is directly affected by the height it has to lift the water. In general the flow rate will decrease as the lift height increases. Horizontal pumping distance is also affected use the formula Max Height - Working Height x 10 to determine the maximum horizontal distance the pump will be capable of.
.gif)
