Draper 110L/Min (Max) 280w 230v Submersible Dirty Water Pump With Float Switch 54657

Draper 110L/Min (Max) 280w 230v Submersible Dirty Water Pump With Float Switch

Ideal for pumping out inspection pits, ditches and footings where suspended solids may be present, general irrigation and other similar applications. Ceramic shaft for long life, thermal overload protection and float switch which automatically turns pump off when water level has dropped. Supplied complete with 10M (approx.) cable and BS approved non-rewireable moulded plug and cable.

Specification:
Maximum head height   ...   6M
Maximum output   ...   110L/min
Hose Height - Approx. Output   ...   4M - 54L/min
Maximum water temperature   ...   35°C
Maximum particle size   ...   30mm dia.
Output aperture   ...   32mm dia.

Additional information regarding Submersible Pumps
Pumps with automatic float switches allow the pump to be left unattended and automatically cuts out when the water level drops below the pumps minimum. Pumps with no float switch are manual and must not be left running when the water level drops below the required minimum.

It is recommended that an RCD is always used with a submersible pump as should be the case whenever electrical products are used with water.

The maximum flow rate of a pump is directly affected by the height it has to lift the water. In general the flow rate will decrease as the lift height increases. Horizontal pumping distance is also affected use the formula Max Height - Working Height x 10 to determine the maximum horizontal distance the pump will be capable of.